Kenmore Appliance Repair Services
Your Local Kenmore Appliance Repair Company
- LICENSED TECHNICIANS
- SAME-DAY SERVICE
- AFFORDABLE RATES
- SERVICE WARRANTY
- MANY AREAS
- 15+ YEARS EXPERIENCE
Trusted Appliance Repair Team!
- 15+ Years Experience
- Warranty on Parts & Labour
- 100% client satisfaction
- Skilled Technicians
Our Kenmore Appliance Repair Services
Kenmore Fridge Repair
A Kenmore refrigerator has a lot going on behind the scenes: compressor operation, condenser airflow, evaporator circulation, sensors, and defrost timing all have to sync. When one part slips, you might notice warm compartments, soggy produce, or constant running that drives up energy use.
We troubleshoot cooling performance, airflow balance between sections, and temperature stability to restore proper storage conditions. We also fix leaks and ice-maker problems that can create puddles or ice buildup.
Common issues we fix:
- Not cooling / warm fridge or freezer section
- Ice maker not producing ice or overfilling
- Water leaking under crisper or from back
- Loud buzzing, clicking, or rattling noises
- Frost buildup due to defrost system faults
- Door not sealing, torn gasket, or misaligned hinges
Kenmore Dryer Repair
Dryers rely on consistent heat, strong airflow, and correct drum movement—when one is off, clothes come out damp, overheated, or wrinkled. We check heating circuits, thermal safety components, venting restrictions, and drum support parts to pinpoint the real cause.
If your unit stops mid-cycle or takes multiple cycles to dry, we test sensors and timer/control functions. We can also address burning smells and abnormal vibration before they become bigger failures.
Common issues we fix:
- No heat or weak heat
- Long dry times caused by airflow restrictions
- Dryer won’t start or stops mid-cycle
- Squealing, thumping, or heavy vibration
- Drum not turning / belt or pulley problems
- Overheating or tripped thermal protection
Kenmore Dishwasher Repair
A Kenmore dishwasher should clean evenly, drain completely, and dry without leaving puddles or gritty residue. If performance drops, the cause may be water fill issues, spray arm flow problems, filtration clogs, or heating faults.
We diagnose wash quality, odor sources, and drainage behavior—especially when the machine leaves standing water or shows error codes. We also address door latch problems that prevent proper sealing and safe operation.
Common issues we fix:
- Not draining / standing water
- Dishes not getting clean or gritty residue
- Leaks around door or from underneath
- Not drying / water not heating properly
- Won’t start, error codes, or control issues
- Door won’t latch or pops open
Kenmore Freezer Repair
A freezer needs stable low temperatures, correct defrost cycles, and good door sealing to prevent frost and food spoilage. When it’s struggling, you may see ice sheets, soft frozen food, or constant running.
We inspect airflow, defrost heaters/sensors, fans, and temperature controls to restore consistent freezing. If the unit is icing up, we also address causes like blocked vents, door alignment issues, or defrost system failures.
Common issues we fix:
- Not freezing / temperature swings
- Heavy frost buildup or ice blockage
- Freezer running constantly
- Fan noise or no airflow
- Door seal failures causing condensation
- Control/sensor errors affecting defrost timing
Kenmore Washer Repair
Washers depend on balanced mechanics, accurate water levels, and reliable spin/drain functions. If your Kenmore washer won’t drain, shakes violently, or leaves clothes too wet, we test pumps, belts (if applicable), suspension components, lid/door locks, and control systems.
We also address fill problems, slow cycles, and detergent residue by checking valves, sensors, and internal flow paths. Whether it’s a simple wear part or a more complex electrical issue, we can repair it.
Common issues we fix:
- Won’t drain or won’t spin
- Leaking water (hoses, pump, tub seal areas)
- Excessive shaking or banging
- Door/lid won’t lock or unlock
- Not filling correctly / water level issues
- Error codes and control malfunctions
Kenmore Cooktop Repair
Cooktops require dependable ignition (gas), steady heat response (electric), and safe, consistent control behavior. If burners click endlessly, won’t light, or heat unevenly, we inspect igniters, switches, elements, wiring, and controls to find the failure point.
We also handle issues with cracked knobs, loose fittings, and burners that won’t adjust properly. Safety matters here, so we verify stable operation after repair.
Common issues we fix:
- Burner won’t ignite or keeps clicking
- Uneven heating or weak heat output
- Element not heating / cycling incorrectly
- Knobs not responding or broken
- Burner shuts off unexpectedly
- Electrical faults, wiring, or control problems
Kenmore Stove Repair
Stoves combine multiple systems—top burners plus an oven cavity—and a single fault can affect cooking reliability. We diagnose inconsistent burner flames, unstable temperature control, and issues with ignition or power delivery.
If your stove smells like gas, trips breakers, or heats unpredictably, we test for safe operation and correct the underlying defect. We also repair worn components that cause wobbling grates, uneven pans, or hard-to-turn controls.
Common issues we fix:
- Burners not lighting or heating properly
- Temperature control problems
- Breaker tripping or electrical irregularities
- Gas odor checks and ignition troubleshooting
- Control knobs sticking or not regulating
- Intermittent shutoffs and sensor issues
Kenmore Oven Repair
A Kenmore oven should preheat smoothly, maintain stable temperature, and bake evenly across racks. When it doesn’t, the cause might be a failing heating element, igniter, temperature sensor, control board, or door seal letting heat escape.
We verify temperature accuracy, cycling behavior, and safety cutoffs—then repair what’s needed so you can trust your cook times again. If the oven won’t turn on or displays errors, we perform targeted electrical and control diagnostics.
Common issues we fix:
- Not heating / no bake or no broil
- Slow preheat or uneven baking
- Temperature inaccurate or drifting
- Oven won’t start / display or keypad issues
- Door not sealing / heat loss
- Error codes and control board faults
Common Kenmore Appliance Issues We Fix
We work with Kenmore appliances daily, resolving a wide range of problems — from refrigerators that won’t cool to ovens that won’t heat properly. Here are some of the most frequent Kenmore appliance issues we come across:
Common Kenmore Fridge issues
- Refrigerator not cooling properly
- Ice maker not producing ice or overproducing
- Water leakage from the fridge
- Freezer not freezing
- Fridge making loud or unusual noises
- Temperature fluctuations
- Display panel not working
- Fridge door not sealing properly
- Water dispenser not functioning
- Frost buildup inside the fridge or freezer​
Common Kenmore Dishwasher issues
- Dishwasher not draining properly
- Dishes coming out dirty or not drying
- Water leakage from the door
- Dishwasher not starting
- Loud or unusual noises during cycles
- Error codes on the control panel
- Spray arms not rotating
- Door latch issues
- Detergent not dispensing properly
- Heating element failure
Common Kenmore Washer issues
- Washer not spinning or draining
- Loud noises during operation
- Water leakage from the washer
- Washer not filling with water
- Error codes on the display
- Door won’t lock or unlock
- Clothes coming out too wet
- Cycle not completing properly
- Unbalanced load errors
- Washer not turning on
Common Kenmore Dryer issues
- Dryer not heating properly
- Clothes taking too long to dry
- Dryer making loud or strange noises
- Error codes on the display
- Drum not spinning
- Overheating issues
- Lint buildup causing airflow restriction
- Moisture sensor not working
- Dryer shutting off too soon
- Power issues (not turning on)
Common Kenmore Stove issues
- Burners not igniting
- Temperature not adjusting properly
- Uneven cooking or baking results
- Stove making unusual noises
- Control panel unresponsive
- Error codes appearing on the display
- Gas smell from burners
- Surface element not heating
- Indicator lights staying on
- Cooktop glass cracking or damage
Common Kenmore Oven issues
- Oven not heating properly
- Temperature fluctuations during cooking
- Error codes on the control panel
- Oven not turning on
- Convection fan not working
- Uneven baking results
- Self-cleaning function not working
- Oven light not turning on/off
- Control board malfunctions
- Door not closing properly
Common Error Codes for Kenmore Appliances
The built-in display in modern Kenmore appliances performs many functions beyond convenient operation. If the appliance detects a serious malfunction at the next startup, an error code will be displayed on the screen to identify the specific breakdown without direct disassembly..
Kenmore dryer repair error codes
PF - Power failure
AF - Restricted airflow mode detected
F-01 - Primary control is not possible
F-02 - User interface and keyboard malfunctions
Kenmore dishwasher repair error codes
F1E1 - The relay on the main control unit is stuck
F1E2 - The main electronic control unit is defective
F3E1 - Thermistor or OWI sensor failure
F6E1 - Water filling is not possible
Kenmore fridge repair error codes
Er FS - Failure of the freezer compartment sensor
Er rS - Failure of the freezer compartment sensor
F dS - Freezer compartment defrost sensor failure
r dS - Need to replace the refrigerator compartment defrost sensor
Your specific error code may not be listed. We've listed the most common problems, but our options for Kenmore repair don't end there. Be sure to contact us and tell the displayed breakdown message, we can probably help you!
What Our Clients Say
Noah

September 3, 2023
Their dryer repair service Brooklyn was great; they were very skilled and did a great job. A customer who was pleased with the excellent service we provided said, "Unconditional praise!"
Elijah

September 6, 2023
My clothes didn't get damaged because they do same-day service. We're grateful that you helped us at the right time. Thanks for getting back to them so fast. The client was happy with it.The technician was nice and knew a lot about how to fix the problems I was having with my dryer. I am certain that I will use their services again! - A pleased client who praised the worker's skill.
David

September 9, 2023
"Great results, quick responses, and clear prices! There was nothing better that a dryer repair service Brooklyn could do. A happy customer who tells us they like how honest and helpful we are.
Chloe

September 15, 2023
These people always work to make sure their customers are happy and pay attention to the little things. Their skill made my washer work like new again, and I'm so grateful! A grateful client who told us they were pleased with the careful steps we took.