186
Hotpoint Appliance Repair

Hotpoint Appliance Repair Services

Your Local Hotpoint Appliance Repair Company

  • LICENSED TECHNICIANS
  • SAME-DAY SERVICE
  • AFFORDABLE RATES
  • SERVICE WARRANTY
  • MANY AREAS
  • 15+ YEARS EXPERIENCE
Up 3 Month Appliance Repair Warranty
Free Service Call with Repair

Our Happy Customers

Our Happy Customers Our Happy Customers Our Happy Customers Our Happy Customers
Trusted Appliance Repair Team!
  • 15+ Years Experience
  • Warranty on Parts & Labour
  • 100% client satisfaction
  • Skilled Technicians
Get $25 Off On Repair Services
Free Service Call with Repair

Hotpoint Fridge Repair

A Hotpoint refrigerator can “run” all day and still not cool correctly—especially when airflow is blocked or the defrost system fails. We inspect temperature consistency (not just one quick reading), listen for compressor and fan behavior, and check for frost patterns that point to a deeper issue.

If you’re seeing warm spots, puddles under drawers, or constant humming, we’ll pinpoint the cause and restore stable cooling. We repair all Hotpoint fridge issues, including complex electrical problems.

Common issues we fix:

  • Not cooling or weak cooling (fresh food warm, freezer ok—or vice versa)
  • Ice buildup on the back wall / defrost failure
  • Leaking water, clogged defrost drain, or cracked water line
  • Loud fan noise, failing evaporator/condenser fan
  • Fridge cycling too often or not starting (relay/capacitor/control problems)
Hotpoint Fridge Repair
Hotpoint Dryer Repair

Hotpoint Dryer Repair

When a Hotpoint dryer stops drying, the problem is often airflow, heat control, or drum movement—not “just a filter.” We check venting restrictions, internal lint buildup, heating components, and sensor operation so the dryer dries efficiently and safely.

If the drum won’t turn, we inspect belts, rollers, idler pulleys, and motor load. We fix any Hotpoint dryer issue, from simple starts to tricky intermittent shutoffs.

Common issues we fix:

  • No heat or low heat (heater/igniter/thermal fuse cycling)
  • Takes too long to dry (airflow restriction, sensor issues)
  • Won’t start or stops mid-cycle
  • Grinding/squealing/thumping noises (rollers, idler, worn supports)
  • Drum not turning (belt, motor, pulley problems)

Hotpoint Dishwasher Repair

A Hotpoint dishwasher may fill but not wash well if spray arms are blocked, the pump is weak, or water isn’t heating to target temperature. We test fill levels, circulation, drainage, and drying performance, then verify seals and door latches to prevent leaks.

If dishes come out gritty, cloudy, or still dirty, we look beyond detergent and focus on pressure, filtration, and temperature control. We handle all Hotpoint dishwasher problems, including electrical and control faults.

Common issues we fix:

  • Not draining or standing water (pump, drain path, blockage)
  • Poor cleaning / weak spray (circulation pump, spray arms, filters)
  • Not drying (heater, vent, thermostat/sensor issues)
  • Leaking from door or underneath (gaskets, seals, float, hose)
  • Error codes, unresponsive buttons, or cycle won’t complete
Hotpoint Dishwasher Repair
Hotpoint Freezer Repair

Hotpoint Freezer Repair

A Hotpoint freezer that can’t hold temperature can lead to spoiled food fast, especially if the door seal is weak or the defrost system is failing. We measure temperature stability, check frost buildup, and test fans and airflow to confirm whether the issue is mechanical, sealed-system related, or electrical.

If you notice excessive frost, soft ice cream, or a freezer that runs nonstop, we’ll diagnose it precisely. We repair all Hotpoint freezer issues—common and uncommon.

Common issues we fix:

  • Not freezing / temperature swings
  • Heavy frost buildup or iced-over coils
  • Noisy operation (fan, compressor start components)
  • Door not sealing / warm air infiltration
  • Freezer running constantly or not starting

Hotpoint Washer Repair

Hotpoint washers can fail in different ways—won’t fill, won’t drain, won’t spin, or shakes so hard it “walks.” We check water valves, pressure sensing, drain pumps, suspension, bearings, and control functions to restore smooth cycles.

If you’re seeing error codes, slow draining, or water left in the drum, we trace the cause from hoses to sensors to the main control. We fix any Hotpoint washer issue, including intermittent electrical faults.

Common issues we fix:

  • Not draining / won’t spin (pump, lid/door lock, control)
  • Leaking water (hoses, seal, tub-to-pump, dispenser path)
  • Excessive vibration or banging (suspension, leveling, worn parts)
  • Won’t fill or overfills (valves, pressure switch, inlet screens)
  • Burning smell, loud rumble, or grinding (bearings, motor, belt)
Hotpoint Washer Repair
Hotpoint Cooktop Repair

Hotpoint Cooktop Repair

A Hotpoint cooktop should heat predictably and respond smoothly to settings—if it doesn’t, cooking becomes frustrating and sometimes unsafe. We test burners or elements, switches/infinite controls, wiring, and safety components to restore even heat and reliable ignition.

If you smell gas, hear clicking that won’t stop, or have zones that won’t heat, we’ll diagnose the full circuit and repair it correctly. We handle all Hotpoint cooktop issues (residential only).

Common issues we fix:

  • Burner won’t ignite or keeps clicking
  • Uneven heating / element not working
  • Knob or control not regulating temperature
  • Indicator lights not working or staying on
  • Electrical smell, tripped breaker, or intermittent power loss

Hotpoint Stove Repair

A Hotpoint stove has multiple systems working together—surface heat, oven heat, controls, and safety features—so one failure can affect everything. We inspect ignition, gas flow (where applicable), temperature control, and electrical connections to restore dependable cooking.

If burners are weak, flames are uneven, or the unit won’t respond to settings, we’ll troubleshoot from the basics to the control board. We fix any Hotpoint stove problem, not just the common ones.

Common issues we fix:

  • Burners not lighting or burning unevenly
  • Weak heat output or fluctuating temperature
  • Broken knobs, stuck valves, or faulty switches
  • Spark module problems (constant clicking)
  • Control/display issues or power interruptions
Hotpoint Stove Repair
Hotpoint Oven Repair

Hotpoint Oven Repair

Ovens can be tricky because “it heats” doesn’t mean it heats correctly—temperature accuracy, cycling, and airflow matter. We test bake/broil performance, sensors, igniters (for gas), elements (for electric), and control signals to restore stable, even baking.

If food is undercooked on one side, the oven takes forever to preheat, or the door doesn’t seal well, we’ll address the real cause. We repair all Hotpoint oven issues, including advanced electrical and control problems.

Common issues we fix:

  • Not heating / won’t preheat (igniter, element, relay/control)
  • Uneven baking or temperature off (sensor, calibration, airflow)
  • Broil not working or weak broil
  • Door not closing properly / heat escaping
  • Error codes, blank display, or unresponsive controls

Common Hotpoint Appliance Issues We Fix

We work with Hotpoint appliances daily, resolving a wide range of problems — from refrigerators that won’t cool to ovens that won’t heat properly. Here are some of the most frequent Hotpoint appliance issues we come across:

Common Hotpoint Fridge issues

  • Refrigerator not cooling properly
  • Ice maker not producing ice or overproducing
  • Water leakage from the fridge
  • Freezer not freezing
  • Fridge making loud or unusual noises
  • Temperature fluctuations
  • Display panel not working
  • Fridge door not sealing properly
  • Water dispenser not functioning
  • Frost buildup inside the fridge or freezer​

Common Hotpoint Dishwasher issues

  • Dishwasher not draining properly
  • Dishes coming out dirty or not drying
  • Water leakage from the door
  • Dishwasher not starting
  • Loud or unusual noises during cycles
  • Error codes on the control panel
  • Spray arms not rotating
  • Door latch issues
  • Detergent not dispensing properly
  • Heating element failure

Common Hotpoint Washer issues

  • Washer not spinning or draining
  • Loud noises during operation
  • Water leakage from the washer
  • Washer not filling with water
  • Error codes on the display
  • Door won’t lock or unlock
  • Clothes coming out too wet
  • Cycle not completing properly
  • Unbalanced load errors
  • Washer not turning on

Common Hotpoint Dryer issues

  • Dryer not heating properly
  • Clothes taking too long to dry
  • Dryer making loud or strange noises
  • Error codes on the display
  • Drum not spinning
  • Overheating issues
  • Lint buildup causing airflow restriction
  • Moisture sensor not working
  • Dryer shutting off too soon
  • Power issues (not turning on)

Common Hotpoint Stove issues

  • Burners not igniting
  • Temperature not adjusting properly
  • Uneven cooking or baking results
  • Stove making unusual noises
  • Control panel unresponsive
  • Error codes appearing on the display
  • Gas smell from burners
  • Surface element not heating
  • Indicator lights staying on
  • Cooktop glass cracking or damage

Common Hotpoint Oven issues

  • Oven not heating properly
  • Temperature fluctuations during cooking
  • Error codes on the control panel
  • Oven not turning on
  • Convection fan not working
  • Uneven baking results
  • Self-cleaning function not working
  • Oven light not turning on/off
  • Control board malfunctions
  • Door not closing properly

Common error codes that can be repaired on Hotpoint appliances

Owners of modern Hotpoint appliances are a little more fortunate, as these appliances are equipped with a self-diagnostic system. If a serious fault is detected, the electronics will display a specific error code, indicating the faulty part without directly disassembling the appliance. We strongly recommend that you provide your error code when contacting the hotline so that the operator can determine the most accurate time and cost for the required Hotpoint oven repair Brooklyn.

Hotpoint dishwasher repair error codes

  • F01 - Overflow protection activated
  • F02 - Water solenoid valve failed
  • F03 - Water cannot be drained
  • F04 - Thermostat needs replacing
Hotpoint dishwasher repair in Brooklyn
Hotpoint oven repair in Brooklyn

Hotpoint oven repair error codes

  • F3-F4 - Temperature sensor and wiring need to be checked
  • F7 - Replace the touch panel
  • F9 - Lock switch failure
  • F1 - The touch panel clock needs to be repaired or replaced

Hotpoint fridge repair error codes

  • E0 - Ice maker defective
  • E1 - Refrigerator compartment temperature sensor broken
  • E2 - Freezer compartment temperature sensor broken
  • E3 - The Defrost sensor needs to be replaced
Hotpoint fridge repair in Brooklyn

We've only highlighted the most common variations, but of course, all the possible error codes don't end there. If your case displays a different value, don't worry, we can surely help you with Hotpoint fridge repair Brooklyn!

What Our Clients Say

Noah Google Reviews
September 3, 2023
Reviews Reviews Reviews Reviews Reviews
Their dryer repair service Brooklyn was great; they were very skilled and did a great job. A customer who was pleased with the excellent service we provided said, "Unconditional praise!"
Elijah Google Reviews
September 6, 2023
Reviews Reviews Reviews Reviews Reviews
My clothes didn't get damaged because they do same-day service. We're grateful that you helped us at the right time. Thanks for getting back to them so fast. The client was happy with it.The technician was nice and knew a lot about how to fix the problems I was having with my dryer. I am certain that I will use their services again! - A pleased client who praised the worker's skill.
David Google Reviews
September 9, 2023
Reviews Reviews Reviews Reviews Reviews
"Great results, quick responses, and clear prices! There was nothing better that a dryer repair service Brooklyn could do. A happy customer who tells us they like how honest and helpful we are.
Chloe Google Reviews
September 15, 2023
Reviews Reviews Reviews Reviews Reviews
These people always work to make sure their customers are happy and pay attention to the little things. Their skill made my washer work like new again, and I'm so grateful! A grateful client who told us they were pleased with the careful steps we took.
Close
Thank You.
We will contact you.
Close
Please enter your name and contact number and we will get in touch with you soon.
Technicians available right now Phone